Valuable space is won on the crowded control panel. Further, of course, a not existing device cannot go defective. The use of a break contact guarantees a high safety level.

tounge-operated-switches with solenoid
 

tounge-operated-switches with solenoid

tounge-operated-switches with solenoid and Safety Interlocks

Welcome to Haake Technologies in Germany.

Manufacturer of tounge operated switches with solenoid, locks, safety mats, safety edges and bumpers


A few words

When we started, in 1987, to translate our ideas into products like operated switches with solenoid, we did not have a clue as to where our entrepreneurial trip would end. At the time, production, design, and sales of operated switches with solenoid took place in our parentsí garage! Ourís would have been a short story, if not for the support of our very first customers and suppliers. Because of their original commitment to us, absolute customer orientation is the number one priority for our colleagues and us.


Since our founding, several product groups like operated switches with solenoid have been designed and successfully launched in the machine safety devices market. With our subsidiaries and distribution partners for operated switches with solenoid in the major industrial countries, we are able to serve our customers in all aspects of labor safety. As a family-owned company, we attach the highest importance to quality for operated switches with solenoid, and for this reason we are proud to connect our own name with our operated switches with solenoid and services. We look forward to your enquiries. We also welcome your comments and any criticism to operated switches with solenoid, as this will help us to improve and to create new solutions.

Advantages of Haake tounge-operated-switches with solenoid

Benefits offered by the trapped-key system, e.g. tounge-operated-switches with solenoid:

- high safety, individual codes
- only pre-determined sequences securing safety are possible
- no spare tongue "in the pocket"
- no cables to the individual guards (cost saving, faults prevented)
- easy retro-fitting
- operated switches with solenoid have locking feature
- particularly suited when there are different energy sources for the machine (electric, pneumatic, ...)
- in areas where people might get trapped: personal safety key
- simple possibilities for teach in
- time delay due to key transfer between switch and guard interlock - run-down processes come to a standstill (if necessary, extend by additional unit)

Haake offers safety interlocks (e.g. tounge-operated-switches with solenoid) with multifold applications for:

safeguarding operators
Automotive industry
Robots
Machine tools
Automation
Packaging machines
Food
Textile
Breweries
Building industry
Chemical industry
Pharmacy
Plastic processing
Oil / gas
Steel
Mining
Power generation / distribution
Environmental protection
Power stations

Switch HST-S and operated switches with solenoid

The operated switches with solenoid is used for isolating the machine, in order to permit safe access. After the voltage has been switched off, the previously trapped key can be removed and used for the next step in the sequence, e.g. opening a guard. The operated switches with solenoid is available as an enclosed (IP 65) or a panel mount version. Versions with multiple locks (enclosed version sheet-steel up to 4, panelmount version up to 10) are also available. Further, versions in explosion-proof enclosures (ATEX zones 21 & 22 and 1 & 2) can also be supplied.

tounge-operated-switches with solenoid

tounge-operated-switches with solenoid
Here you will find information about tounge-operated-switches with solenoid and:
tounge-operated-switches with solenoid