An often critical feature for any electrical component, of course for safety edges, too, is sealing. Ingress of humidity or water may lead to failures. Critical for sealing, in a safety edge, is the interface between rubber profile and end caps being normally glued to each other.
security bolt and Safety Interlocks
Welcome to Haake Technologies in Germany.
Manufacturer of security bolt, locks, safety mats, safety edges and bumpers
A few words to Security Bolt
When we started, in 1987, to translate our ideas into products like Security Bolt, we did not have a clue as to where our entrepreneurial trip would end. At the time, production, design, and sales of Security Bolt took place in our parentsí garage! Ourís would have been a short story, if not for the support of our very first customers and suppliers. Because of their original commitment to us, absolute customer orientation is the number one priority for our colleagues and us.
SAFETY INTERLOCKS and security boltHigh safety.
Security Bolt: Such guard locking devices are for instance key-operated mechanical interlocks, also called trapped-key systems. They are based on the easy-to-understand premise that a key cannot in two places at the same time - it can for instance be inserted in a switch OR be used for opening a guard.
Advantages of Haake security boltHaake offers safety interlocks (e.g. security bolt) with multifold applications for:
security bolt - safeguarding operators
security bolt - Automotive industry
security bolt - Robots
security bolt - Machine tools
security bolt - Automation
security bolt - Packaging machines
security bolt - Food
security bolt - Textile
security bolt - Breweries
security bolt - Building industry
security bolt - Chemical industry
security bolt - Pharmacy
security bolt - Plastic processing
security bolt - Oil / gas
security bolt - Steel
security bolt - Mining
security bolt - Power generation / distribution
security bolt - Environmental protection
security bolt - Power stations
Switch HST-S and security boltSecurity Bolt: The switch HST-S is used for isolating the machine, in order to permit safe access. After the voltage has been switched off, the previously trapped key can be removed and used for the next step in the sequence, e.g. opening a guard.
Security Bolt: The unit is available as an enclosed (IP 65) or a panel mount version. Versions with multiple locks (enclosed version sheet-steel up to 4, panelmount version up to 10) are also available. Further, versions in explosion-proof enclosures (ATEX zones 21 & 22 and 1 & 2) can also be supplied.
Here you will find information about security bolt and: