Valuable space is won on the crowded control panel. Further, of course, a not existing device cannot go defective. The use of a break contact guarantees a high safety level.
safety of machinery and Safety Interlocks
Welcome to Haake Technologies in Germany.
Manufacturer of safety of machinery, locks, safety mats, safety edges and bumpers
A few words
When we started, in 1987, to translate our ideas into products like safety of machinery, we did not have a clue as to where our entrepreneurial trip would end. At the time, production, design, and sales of safety of machinery took place in our parentsí garage! Ourís would have been a short story, if not for the support of our very first customers and suppliers. Because of their original commitment to us, absolute customer orientation is the number one priority for our colleagues and us.
Since our founding, several product groups of safety of machinery have been designed and successfully launched in the machine safety devices market
. With our subsidiaries and distribution partners for safety of machinery in the major industrial countries, we are able to serve our customers in all aspects of labor safety. As a family-owned company, we attach the highest importance to quality of safety of machinery, and for this reason we are proud to connect our own name with our safety of machinery and services. We look forward to your enquiries. We also welcome your comments and any criticism to safety of machinery, as this will help us to improve and to create new solutions.
Advantages of Haake safety of machineryBenefits offered by the trapped-key system, e.g. safety of machinery:
- high safety, individual codes
- only pre-determined sequences securing safety are possible
- no spare tongue "in the pocket"
- no cables to the individual guards (cost saving, faults prevented)
- easy retro-fitting
- safety of machinery have locking feature
- particularly suited when there are different energy sources for the machine (electric, pneumatic, ...)
- in areas where people might get trapped: personal safety key
- simple possibilities for teach in
- time delay due to key transfer between switch and guard interlock - run-down processes come to a standstill (if necessary, extend by additional unit)
Haake offers safety interlocks (e.g. safety of machinery) with multifold applications for:
Oil / gas
Power generation / distribution
Switch HST-S and safety of machinerysafety of machinery: The switch HST-S is used for isolating the machine, in order to permit safe access. After the voltage has been switched off, the previously trapped key can be removed and used for the next step in the sequence, e.g. opening a guard. safety of machinery: The unit is available as an enclosed (IP 65) or a panel mount version. Versions with multiple locks (enclosed version sheet-steel up to 4, panelmount version up to 10) are also available. Further, versions in explosion-proof enclosures (ATEX zones 21 & 22 and 1 & 2) can also be supplied.
safety of machinery
Here you will find information about safety of machinery and: