An often critical feature for any electrical component, of course for safety edges, too, is sealing. Ingress of humidity or water may lead to failures. Critical for sealing, in a safety edge, is the interface between rubber profile and end caps being normally glued to each other.
key transfer and Safety Interlocks
Welcome to Haake Technologies in Germany.
Manufacturer of key transfer, locks, safety mats, safety edges and bumpers
A few words about Key Transfer
When we started, in 1987, to translate our ideas into products like Key Transfer, we did not have a clue as to where our entrepreneurial trip would end. At the time, production, design, and sales of Key Transfer took place in our parentsí garage! Ourís would have been a short story, if not for the support of our very first customers and suppliers. Because of their original commitment to us, absolute customer orientation is the number one priority for our colleagues and us.
Since our founding, several product groups like Key Transfer have been designed and successfully launched in the machine safety devices market
. With our subsidiaries and distribution partners for Key Transfer in the major industrial countries, we are able to serve our customers in all aspects of labor safety. As a family-owned company, we attach the highest importance to quality for Key Transfer, and for this reason we are proud to connect our own name with our Key Transfer and services. We look forward to your enquiries. We also welcome your comments and any criticism, as this will help us to improve and to create new Key Transfer.
Advantages of Haake key transferBenefits offered by the trapped-key system, e.g. key transfer:
- high safety, individual codes
- only pre-determined sequences securing safety are possible
- no spare tongue "in the pocket"
- no cables to the individual guards (cost saving, faults prevented)
- easy retro-fitting
- Key Transfer have locking feature
- particularly suited when there are different energy sources for the machine (electric, pneumatic, ...)
- in areas where people might get trapped: personal safety key
- simple possibilities for teach in
- time delay due to key transfer between switch and guard interlock - run-down processes come to a standstill (if necessary, extend by additional unit)
Haake offers safety interlocks (e.g. key transfer) with multifold applications for:
Oil / gas
Power generation / distribution
Switch HST-S and Key TransferKey Transfer: The switch HST-S is used for isolating the machine, in order to permit safe access. After the voltage has been switched off, the previously trapped key can be removed and used for the next step in the sequence, e.g. opening a guard.
Key Transfer: The unit is available as an enclosed (IP 65) or a panel mount version. Versions with multiple locks (enclosed version sheet-steel up to 4, panelmount version up to 10) are also available. Further, versions in explosion-proof enclosures (ATEX zones 21 & 22 and 1 & 2) can also be supplied.
Here you will find information about key transfer and: