gate locking

gate locking
 

gate locking

Actuation will commence at low actuating forces and after a very short response travel, providing a fast response time. The full remaining height of the rubber profile is available as an over-travel. In particular with regard to the prevention of injuries, large over-travels are of enormous importance for a safety sensitive edge.

gate locking and Safety Interlocks

Welcome to Haake Technologies in Germany.

Manufacturer of gate locking, locks, safety mats, safety edges and bumpers

A few words to gate locking

When we started, in 1987, to translate our ideas into products like gate locking, we did not have a clue as to where our entrepreneurial trip would end. At the time, production, design, and sales of gate locking took place in our parents’ garage! Our’s would have been a short story, if not for the support of our very first customers and suppliers. Because of their original commitment to us, absolute customer orientation is the number one priority for our colleagues and us.


Since our founding, several product groups like gate locking have been designed and successfully launched in the machine safety devices market.

With our subsidiaries and distribution partners for gate locking in the major industrial countries, we are able to serve our customers in all aspects of labor safety. As a family-owned company, we attach the highest importance to quality, and for this reason we are proud to connect our own name with our products like gate locking and services. We look forward to your enquiries. We also welcome your comments and any criticism, as this will help us to improve and to create new solutions for gate locking.

SAFETY INTERLOCKS and gate locking

High safety.

gate locking: Such guard locking devices are for instance key-operated mechanical interlocks, also called trapped-key systems. They are based on the easy-to-understand premise that a key cannot in two places at the same time - it can for instance be inserted in a switch OR be used for opening a guard.
gate locking: Another safety-relevant feature is that a key can only become free in a safe condition, when there are no hazards - a switch is turned off, a guard interlock is closed and locked. The big advantage of the system is the fact that a certain sequence of steps can be predetermined when designing the system. It is not possible to deviate from this sequence - thus a high degree of integrity is achieved. So virtually any hazard can be eliminated.

Advantages of Haake gate locking

Haake offers safety interlocks (e.g. gate locking) with multifold applications for:
safeguarding operators
Automotive industry
Robots
Machine tools
Automation
Packaging machines
Food
Textile
Breweries
Building industry
Chemical industry
Pharmacy
Plastic processing
Oil / gas
Steel
Mining
Power generation / distribution
Environmental protection
Power stations

Switch HST-S

gate locking: The switch HST-S is used for isolating the machine, in order to permit safe access. After the voltage has been switched off, the previously trapped key can be removed and used for the next step in the sequence, e.g. opening a guard.
gate locking: The unit is available as an enclosed (IP 65) or a panel mount version. Versions with multiple locks (enclosed version sheet-steel up to 4, panelmount version up to 10) are also available. Further, versions in explosion-proof enclosures (ATEX zones 21 & 22 and 1 & 2) can also be supplied.

gate locking

  
gate locking
Here you will find information about door interlocks and gate locking

gate locking